Materialen

• 3-1/4 Sheets  –  3/4″ Birch PureBond Plywood
• 1/2 Sheet –  1/4″ Birch PureBond Plywood
• Qty 4  –  2 x 8 x 10′ Untreated Lumber
• Qty 5  –  1 x 2 x 8′ Common Boards
• 2-1/2″ Kreg Pocket Hole Screws (Coarse)
• 1-1/4″ Kreg Pocket Hole Screws (Coarse)
• 1-1/4″ Brad Nails
• 2″ Wood Screws
• 1-1/4″ Wood Screws
• 3/4″ Wood Screws
• Wood Glue
• Qty 2  –  26″ Drawer Slides
• Qty 2  –  Large Drawer Pulls
  • I used gate handles
• Qty 2  –  Small Cabinet Knobs/Handles
  • I used light duty black handles
• Qty 4  –  Hooks
  • We purchased ours from Hobby Lobby
• Qty 2  –  Ceiling Hooks
• Qty 4  –  Hinges
  • Note: I used Lift Up Hinges(meh.. they’re cool but don’t work as well as I imagined.)
  • What you use will be determined by which door style you choose